Enable and power your Revolut Register
Your Revolut Register has two interfaces: the main register and the payment module. To start: - Plug the main register into power with the payment module attached - Press the power button - Log in to the Revolut POS software on both devices
Power and battery
The main register has no battery and only works when plugged in. To start: - Connect its charging cable to the USB port marked with a plug symbol at the bottom of the device - Press the power button
The payment module charges and switches on automatically when attached to the main register, and can also be charged with the USB-C cable included in the box.
Connect to the internet and log in
On first start, both interfaces prompt you to connect to wifi. Later, once logged in, you can connect mobile data with eSIM: - 'More' - 'Device settings' - 'Network' - 'Mobile data' - 'Enable eSIM'
You need to log in on both devices. Logins work the same as Revolut POS, including which credentials to use, who can log in, and how to add team members. See this FAQ to learn more.
If no location is available, you will be prompted to create one, or you can create or update locations through the Revolut POS web portal before selecting it on the Register. Once connected, you can start selling. Learn more in this FAQ.
Connect printers
Only Star TSP 100 III and 143III are compatible with Revolut Registers. To learn to connect and troubleshoot your printers consult these FAQs.
Note that if using eSIM you will not be able to connect printers, as they need to be on the same network.